Short answer: yes. At Ecopaperbox, a Guangzhou-based custom paper packaging factory, our standard minimum order quantity is 100 pieces for most box types — and that 100-piece run can carry your full logo, brand colors, and artwork through in-house offset printing. You do not need to order 1,000 or 3,000 boxes to get a box that looks like it came from a real brand.
Why 100 Pieces Is Enough for Logo Printing
For years the packaging industry treated 1,000–3,000 pieces as the floor because the cost of a printing plate and die had to be spread across a large run. When the factory owns its presses and keeps overhead low, that math changes. At 100 pieces the plate and dieline are still required, but the per-unit load is small enough that branding a short run stays affordable.
Ecopaperbox runs Heidelberg, Komori, and Roland offset presses in-house, so color and logo placement are controlled on the same floor that prints your order — not handed to a trading company that subcontracts to an unknown plant. That direct control is why a 100-piece run looks as clean as a 5,000-piece one.
The 100-piece floor also lowers your cash risk. Instead of tying up budget in 3,000 boxes you may redesign after the first review, you test the market with a small batch, learn what customers say about the unboxing, then reorder with confidence. For a new brand, that agility is worth more than the few cents saved per box at a higher minimum.
What "Printing Your Logo" Actually Involves
Logo printing is three steps, not one. First is the dieline — the cut-and-fold blueprint that defines your box shape. Ecopaperbox provides this structural file free. Second is the artwork: your logo placed in the right spot with bleed, outlined fonts, and 300 dpi resolution. Third is the plate that carries the image onto the board.
A common mistake is sending a low-resolution JPG pulled from a website; it will look soft in print even on a 100-piece run. A clean vector file (AI, PDF, or EPS) prints crisp at any size.
Which Box Types Take a Logo at 100 Pieces
Every structure we make accepts full artwork at 100 pieces. The real difference is shipping shape and feel:
| Box type | Material | Ships | Logo at 100 pcs |
|---|---|---|---|
| Rigid gift / luxury | Greyboard 1000–1500 gsm + 157 gsm C2S | Assembled | Yes |
| Collapsible magnetic | Same greyboard + hidden magnets | Flat | Yes |
| Folding carton | SBS white / kraft | Flat | Yes |
| Corrugated mailer | E/B/F flute + liner | Flat | Yes |
| Kraft box | Recycled kraft | Flat | Yes |
Never call a rigid box "white card" or "kraft core" — it is built on greyboard. And only the collapsible magnetic type among rigid boxes folds flat for shipping.
Getting Your Brand Color Right
Most logo prints run in CMYK process color, which matches the vast majority of brand palettes closely enough for a short run. If your logo relies on one or two exact brand colors — a specific retail green, for example — ask for Pantone spot inks (up to six spots are practical). Spot color removes the guesswork of process mixing and keeps that green identical across reorders.
Because the presses are in-house, the print supervisor can pull a physical proof and check it against your file before the full run, rather than shipping blind from a subcontractor. If the color is mission-critical, request that proof on the actual board stock — a logo that looks right on coated proof paper can shift slightly on kraft. That small step protects a 100-piece run as much as a large one.
A Free Blank Sample Beats a Guess
Before you commit to print, ask for a free blank sample in your chosen structure. It shows the actual size, wall stiffness, and how the box opens — things a screen mockup hides. Many buyers find their "perfect" dimension is half a centimeter too shallow only after seeing the physical box. Checking structure first means your 100-piece logo run prints on a box you have already approved.
Common Mistakes Buyers Make
- Web-resolution logo: a 72 dpi file looks blurry in print; send a vector.
- No dieline layer: artwork placed without the fold map lands the print on a crease.
- Skipping the sample: discovering the size is wrong after print wastes the whole run.
None of these block a 100-piece order — they just cause a reprint if ignored. Get the file right and the run is clean.
When 100 Pieces Isn’t the Right Move
Low MOQ is a tool, not a rule. If you have already validated the design and sell steadily, jumping to 1,000 or 5,000 pieces cuts the per-unit cost because the plate and dieline are amortized over more boxes — useful when margin matters more than flexibility. A 100-piece run also makes less sense if your artwork is still a rough sketch; print it once and you are locked into that version until the next reorder. The honest test: order 100 when you are still learning, and scale up only when sell-through is proven. Ecopaperbox keeps the same dieline on file, so stepping from 100 to 5,000 later is a reorder, not a restart.
Our Factory, Your Brand
Ecopaperbox is a Guangzhou factory with in-house offset printing, lamination, die-cutting, and hand assembly. We hold ISO 9001 quality certification for our workshop, High-Tech Enterprise status (certificate no. GR202544012474, valid from 2025-12-19), and are SGS-audited. Need FSC-certified paper? We can source FSC-certified stock from FSC-certified mills with chain-of-custody documentation on request. Standard lead time after artwork approval is 7–12 working days. Bulk orders of 5,000+ stay factory-direct with us — no need to move to a marketplace.
Want the structure file first? Read our dieline guide, or compare rigid vs folding boxes to pick the right base.